Journal article 965 views 121 downloads
Application of Molecular Vapour Deposited Al2O3 for Graphene-Based Biosensor Passivation and Improvements in Graphene Device Homogeneity
,
Klaudia Rejnhard,
Cerys Jenkins,
Ehsaneh Daghigh Ahmadi,
Sanjiv Sharma ,
Owen Guy
Nanomaterials, Volume: 11, Issue: 8, Start page: 2121
Swansea University Authors:
Muhammad Ali, Jacob Mitchell, Gregory Burwell , Klaudia Rejnhard, Cerys Jenkins, Ehsaneh Daghigh Ahmadi, Sanjiv Sharma , Owen Guy
-
PDF | Version of Record
Copyright: © 2021 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
Download (4.82MB)
DOI (Published version): 10.3390/nano11082121
Abstract
Graphene-based point-of-care (PoC) and chemical sensors can be fabricated using photolithographic processes at wafer-scale. However, these approaches are known to leave polymerresidues on the graphene surface, which are difficult to remove completely. In addition, graphenegrowth and transfer process...
| Published in: | Nanomaterials |
|---|---|
| ISSN: | 2079-4991 |
| Published: |
MDPI AG
2021
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa58054 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Graphene-based point-of-care (PoC) and chemical sensors can be fabricated using photolithographic processes at wafer-scale. However, these approaches are known to leave polymerresidues on the graphene surface, which are difficult to remove completely. In addition, graphenegrowth and transfer processes can introduce defects into the graphene layer. Both defects and resistcontamination can affect the homogeneity of graphene-based PoC sensors, leading to inconsistentdevice performance and unreliable sensing. Sensor reliability is also affected by the harsh chemicalenvironments used for chemical functionalisation of graphene PoC sensors, which can degrade partsof the sensor device. Therefore, a reliable, wafer-scale method of passivation, which isolates thegraphene from the rest of the device, protecting the less robust device features from any aggressive chemicals, must be devised. This work covers the application of molecular vapour depositiontechnology to create a dielectric passivation film that protects graphene-based biosensing devicesfrom harsh chemicals. We utilise a previously reported “healing effect” of Al2O3 on graphene toreduce photoresist residue from the graphene surface and reduce the prevalence of graphene defects to improve graphene device homogeneity. The improvement in device consistency allows formore reliable, homogeneous graphene devices, that can be fabricated at wafer-scale for sensing andbiosensing applications. |
|---|---|
| Keywords: |
graphene; passivation; molecular vapour deposition; biosensors; aluminium oxide |
| College: |
Faculty of Science and Engineering |
| Funders: |
This research was funded by Innovate UK under the Newton Fund-China-UK Research and Innovation Bridges Competition 2015 (File Ref: 102877), Knowledge Economy Skills Scholarships (KESS), and the Application Specific Semiconductor Etch Technologies (ASSET) Project funded by the European Regional Development Fund via the Welsh Governments Smart Expertise Operation. J.J.M.,
K.R., and G.B. acknowledge the financial support from Avenues of Commercialisation of Nano &
Micro Technologies (ACNM) Operation funded by the European Regional Development Fund via the
Welsh Government. K.R. is funded by the EPSRC DTP program and by the Welsh Government’s Ser
Cymru II program (Sustainable Advanced Materials). Funding from the Capacity Builder Accelerator
Programs through the European Regional Development Fund, Welsh European Funding Office, and
Swansea University Strategic Initiative in Sustainable Advanced Materials is also acknowledged. |
| Issue: |
8 |
| Start Page: |
2121 |