E-Thesis 146 views 321 downloads
Design and Scaling of Lateral Super-Junction Multi-Gate MOSFET by 3-D TCAD Simulations / Olujide A. Adenekan
PDF | E-Thesis – open accessDownload (6.11MB)
DOI (Published version): 10.23889/Suthesis.50915
A design, optimisation, and scaling of a complementary metal-oxide-semiconductor CMOS-compatible lateral super-junction (SJ) multi-gate (MG) MOSFET(SJ-MGFET) based on silicon-on-insulator (SOI) technology is examined as a pre-ferred solution in mitigating the predominance of channel resistance durin...
No Tags, Be the first to tag this record!
A design, optimisation, and scaling of a complementary metal-oxide-semiconductor CMOS-compatible lateral super-junction (SJ) multi-gate (MG) MOSFET(SJ-MGFET) based on silicon-on-insulator (SOI) technology is examined as a pre-ferred solution in mitigating the predominance of channel resistance during operation at a low voltage. In order to overcome the preponderance of the channel resistance, the SJ-MGFET uses a non-planar 3-D embedded trench gate and a folded alternat-ing U-shaped n/p– SJ drift region pillar. The trench gate will redistribute electron current crowding near the top surface of the n− pillar reducing the channel resis-tance. The folded U-shaped n/p– pillar uniformly distributes the electric ﬁeld in the SJ drift region.The variations in the device architecture of a 1 µm gate length lateral super-junction (SJ) multi-gate MOSFET (SJ-MGFET) are explored using the physically based commercial 3-D TCAD device simulations by Silvaco. Investigation and analysis of diﬀerent carrier transport models are carried out with diﬀerent doping proﬁles by calibrating the drift-diﬀusion simulations to experimental I-V characteristics and breakdown voltage of the SJ-MGFET. The study, then aimed to improve drive current, breakdown voltage (BV ), and speciﬁc on-resistance (Ron,sp). The eﬀect of charge imbalance in the SJ pillar unit on the device breakdown voltage is studied with variations in the drift region length. It is observed that the charge imbalance in the SJ unit barely changes due to the ﬁxed ratio between the pillar width and the pillar height.It has been reported that the simulated and optimised SJ-MGFET device achieves 41% increase in the drive current with an on-oﬀ ratio of 5×106 at a drain voltage of 10 V and a gate voltage of 20 V , thereby demonstrating a big advantage of the multi-gate device design to reduce the leakage current. The results have shown that the optimised 1 µm gate length SJ-MGFET device oﬀers a speciﬁc on-resistance of 0.21 mΩ.cm2 and a breakdown voltage of 65 V with a trench-gate depth of 2.7 µm, a pillar height of 3.6 µm and a drift region length of 3.5 µm. In addition, it achieves 68%, 52% and 15% reduction in the speciﬁc on-resistance compared to the reported fabricated SJ-LDMOSFET, fabricated SJ-FinFET and simulated SJ-FinFET at the same BV rating, thereby capable of oﬀering a better performance in terms of a high drive current, a maximum breakdown voltage, a minimum speciﬁc on-resistance, and excellent FoM for sub - 100 V rating applications.Furthermore, the potentiality of scaling the device architecture of the optimised SJ-MGFET is examined from the 1 µm gate length to 0.5 µm, and 0.25 µm, respectively. Diﬀerent scaling approaches is carefully explored in all dimensions of the 3-D device structure in the simulations. The scaling down of the 1.0 µm gate length SJ-MGFET structure laterally (along the y-axis) by scaling the channel length, the gate length, the gate oxide thickness, and the SJ drift unit length by a factor S to shrink the gate length of 1.0 µm to 0.5 µm and 0.25 µm is examined in the simulations in this thesis. In order to prevent a weak electrostatic integrity in the scaled 0.5 µm and 0.25 µm gate lengths (Lgate) SJ-MGFETs, the doping proﬁle is optimised aiming at achieving a maximum drive current, a minimum leakage current, a high switching capability, a low speciﬁc on-resistance, and an improve avalanche capabilities of the devices. The scaled and optimised SJ-MGFETs with a gate length of 0.5 µm and 0.25 µm achieve 30% and 63% increase in the drive current in comparison with the 1.0 µm gate length SJ-MGFET at a drain voltage of 0.1 V and a gate voltage of 15 V . Additionally, the scaled SJ-MGFETs oﬀer a transconductance (gm) of 20 mS/mm and 56 mS/mm at a drain voltage of 0.1 V with a gate length of 0.5 µm and 0.25 µm, respectively. The SJ-MGFETs with a gate length of 0.5 µm and 0.25 µm having a pillar of a width of 0.3 µm and a trench depth of 2.7 µm, achieve a low speciﬁc on-resistance (Ron,sp) of 7.68 mΩ.mm2 and 2.24 mΩ.mm2 (VGS = 10 V ) and breakdown voltage (BV ) of 48 V and 26 V , respectively.Finally, the lateral scaling and optimisation of the 1 µm gate length SJ-MGFET to gate lengths of 0.5 µm and 0.25 µm using Silvaco Technology Computer Aided Design (TCAD) simulations has shown that the FoM of the non-planar transistor can be greatly improved in terms of switching speed, drive current, breakdown voltage, speciﬁc on-resistance, and physical density for a higher integration in a CMOS architecture.
College of Engineering