No Cover Image

Journal article 1308 views 291 downloads

Impact of Cross-Sectional Shape on 10-nm Gate Length InGaAs FinFET Performance and Variability

Natalia Seoane, Guillermo Indalecio, Daniel Nagy, Karol Kalna Orcid Logo, Antonio J. Garcia-Loureiro

IEEE Transactions on Electron Devices, Volume: 65, Issue: 2, Pages: 456 - 462

Swansea University Author: Karol Kalna Orcid Logo

Check full text

DOI (Published version): 10.1109/TED.2017.2785325

Abstract

Three cross sections (rectangular, bullet shaped, and triangular), resulting from the fabrication process, of nanoscale In0.53Ga0.47As-on-insulator FinFETs with a gate length of 10.4 nm are modeled using in-house 3-D finite-element density-gradient quantum-corrected drift–diffusion and Monte Carlo s...

Full description

Published in: IEEE Transactions on Electron Devices
ISSN: 0018-9383 1557-9646
Published: 2018
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa38327
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: Three cross sections (rectangular, bullet shaped, and triangular), resulting from the fabrication process, of nanoscale In0.53Ga0.47As-on-insulator FinFETs with a gate length of 10.4 nm are modeled using in-house 3-D finite-element density-gradient quantum-corrected drift–diffusion and Monte Carlo simulations. We investigate the impact of the shape on I – V characteristics and on the variability induced by metal grain granularity (MGG), line-edge roughness (LER), and random dopants (RDs) and compared with their combined effect. The more triangular the cross section, the lower the OFF-current, the drain-induced-barrier-lowering, and the subthreshold slope. The ION/IOFF ratio is three times higher for the triangular-shaped FinFET than for the rectangular-shape one. Independent of the cross section, the MGG variations are the preeminent fluctuations affecting the FinFETs, with four to two times larger σVT than that from the LER and the RDs, respectively. However, the variability induced threshold voltage ( VT ) shift is minimal for the MGG (around 2 mV), but VT shift increases 4-fold and 15-fold for the LER and the RDs, respectively. The cross-sectional shape has a very small influence in VT and OFF-current of the MGG, LER, and RD variabilities, both separated and in combination, with standard deviation differences of only 4% among the different device shapes. Finally, the statistical sum of the three sources of variability can predict simulated combined variability with only a minor overestimation.
Keywords: Density gradient (DG) quantum corrections, drift–diffusion (DD), FinFET, line-edge roughness (LER), metal grain granularity (MGG), random dopants (RDs)
College: Faculty of Science and Engineering
Issue: 2
Start Page: 456
End Page: 462

Similar Items