No Cover Image

Journal article 155 views 43 downloads

A Family of High-Boost Active-Switched Impedance Networks With Low Shoot- Through Current Using Coupled-Inductor

Mohioddin Sobhani Mahmoodabadi Orcid Logo, Mohammad Monfared Orcid Logo, Ahmad Mahdave Orcid Logo

IEEE Transactions on Industrial Electronics, Pages: 1 - 12

Swansea University Author: Mohammad Monfared Orcid Logo

  • TIE3429654.pdf

    PDF | Accepted Manuscript

    CC-BY 4.0 Licence on Author Accepted Manuscript (AM)

    Download (1.35MB)

Check full text

DOI (Published version): 10.1109/tie.2024.3429654

Abstract

This article proposes a novel class of impedance source networks based on coupled inductors and an active switch. Due to the turn ratio of the coupled inductors, these networks offer unique features, such as high-voltage gain and flexibility in design. The proposed networks effectively reduce the vo...

Full description

Published in: IEEE Transactions on Industrial Electronics
ISSN: 0278-0046 1557-9948
Published: Institute of Electrical and Electronics Engineers (IEEE) 2024
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa67381
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: This article proposes a novel class of impedance source networks based on coupled inductors and an active switch. Due to the turn ratio of the coupled inductors, these networks offer unique features, such as high-voltage gain and flexibility in design. The proposed networks effectively reduce the voltage spikes and current stresses, which are common drawbacks of most coupled inductor-based networks. They also offer continuous input current and ultrahigh voltage gain, minimizing shoot-through (ST) duty cycles (D) and resulting in many practical advantages. Reduced current stresses, specifically the ST current, have reduced the total power losses of the elements and the capacity of the passive elements. These features demonstrate the converters’ superior efficiency and higher power density. Theoretical performance analysis and comparisons with similar topologies are presented. Finally, experimental tests on a 300W dc–dc converter confirm the theoretical results.
College: Faculty of Science and Engineering
Start Page: 1
End Page: 12

Similar Items