No Cover Image

Journal article 240 views 153 downloads

Smooth DC-Link Y-Source Inverters: Suppression of Shoot-Through Current and Avoiding DC Magnetism

Ali Nikbahar Orcid Logo, Mohammad Monfared Orcid Logo

IEEE Transactions on Power Electronics, Volume: 37, Issue: 10, Pages: 12357 - 12369

Swansea University Author: Mohammad Monfared Orcid Logo

Check full text

DOI (Published version): 10.1109/tpel.2022.3178202

Abstract

The Y-source impedance network is truly referred to as the origin of the magnetically coupled impedance source (MCIS) inverters. The key characteristics, including high boost capability and design flexibility, are associated with the coupled inductor turn ratio. However, the magnetic element brings...

Full description

Published in: IEEE Transactions on Power Electronics
ISSN: 0885-8993 1941-0107
Published: Institute of Electrical and Electronics Engineers (IEEE) 2022
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa60127
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: The Y-source impedance network is truly referred to as the origin of the magnetically coupled impedance source (MCIS) inverters. The key characteristics, including high boost capability and design flexibility, are associated with the coupled inductor turn ratio. However, the magnetic element brings some practical challenges, such as voltage spikes, high shoot-through (ST) current, and bulky coupled inductors. This paper proposes two new Y-source inverters with clamped DC-link voltage. Due to the high boost ability, they are suitable for single-stage high gain inversions. Additionally, the significant reduction in the amplitude of the ST current leads to a reduction of the total power loss and capacity of the reactive component. Another attractive characteristic is that the Y-shaped coupled inductor's stored energy is no longer affected by the power rating of the converter, as a result of the zero dc magnetizing current. All these contribute to the high efficiency and power density of the proposed converters. The design guidelines of the components are presented and a thorough comparison with the state of the art is carried out. The achievements are then confirmed through extensive tests on a 500W laboratory setup.
College: Faculty of Science and Engineering
Issue: 10
Start Page: 12357
End Page: 12369

Similar Items