Journal article 255 views 47 downloads
Enhancing the Performance of the Mesoporous TiO2 Film in Printed Perovskite Photovoltaics through High-Speed Imaging and Ink Rheology Techniques
,
Rebecca Bolton ,
Tom Dunlop ,
Kathryn Lacey,
Carys Worsley,
Trystan Watson ,
Eifion Jewell
Advanced Functional Materials, Volume: 34, Issue: 36, Start page: 2401959
Swansea University Authors:
Sarah-Jane Potts , Tom Dunlop , Kathryn Lacey, Carys Worsley, Trystan Watson , Eifion Jewell
-
PDF | Version of Record
© 2024 The Authors. This is an open access article under the terms of the Creative Commons Attribution License.
Download (3.83MB)
DOI (Published version): 10.1002/adfm.202401959
Abstract
Mesoscopic carbon-based perovskite solar cells (C-PSCs) have the potential to be manufactured at an industrial scale by utilizing screen-printing, a simple, affordable, and commercially mature process. As such, many recent publications have focused on enhancing performance through modifying cell arc...
| Published in: | Advanced Functional Materials |
|---|---|
| ISSN: | 1616-301X 1616-3028 |
| Published: |
Wiley
2024
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa66570 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Mesoscopic carbon-based perovskite solar cells (C-PSCs) have the potential to be manufactured at an industrial scale by utilizing screen-printing, a simple, affordable, and commercially mature process. As such, many recent publications have focused on enhancing performance through modifying cell architecture and perovskite chemistries. This work examines how ink rheology can be tuned to optimize cell performance through reducing the occurrence of common print defects to create higher quality m-TiO2 films. Inks with different solvent dilutions and rheological profiles are assessed using high-speed imaging through the screen-printing visualization (SPV) technique, to investigate the impact of the viscosity and elasticity on ink separation mechanisms. The resultant film quality and its influence on device performances are then assessed. Ink separation lengths are minimized, and the formation of filaments ceases during printing, leading to improved TiO2 film topography and homogenous infiltration of the perovskite precursor. Consequently, PCE is improved by over 10% of the original efficiency in cells and 224 cm2 active area modules due to enhanced Voc and FF. These results not only provide key insights into tailoring ink rheology, to achieve improved print homogeneity and higher performing cells, but also aid further work on enhancing the performance of other screen-printed functional films. |
|---|---|
| Keywords: |
High-speed imaging; perovskite; photovoltaics; printed electronics; rheology; screen-printing; surface characterization; TiO2 |
| College: |
Faculty of Science and Engineering |
| Funders: |
EPSRC. Grant Numbers: EP/M028267/ 1, EP/N020863/1; European Regional Development Fund; Welsh Government. Grant Number: 80708 |
| Issue: |
36 |
| Start Page: |
2401959 |