Journal article 282 views 40 downloads
Improving the Corrosion Performance of Organically Coated Steel Using a Sol–Gel Overcoat
,
Christian Griffiths,
Calvin Richards,
Sarah-Jane Potts ,
Chris Batchelor ,
Peter Barker,
Justin Searle ,
Eifion Jewell
Materials, Volume: 17, Issue: 5, Start page: 1075
Swansea University Authors:
Evan Watkins , Christian Griffiths, Calvin Richards, Sarah-Jane Potts , Justin Searle , Eifion Jewell
-
PDF | Version of Record
Copyright: © 2024 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license
Download (6.9MB)
DOI (Published version): 10.3390/ma17051075
Abstract
Organically coated steels are widely used in applications in which they are subjected to the natural environment and therefore require excellent corrosion resistance. Organic clearcoats are typically employed as a barrier that improves the overall corrosion resistance; however, they are typically de...
| Published in: | Materials |
|---|---|
| ISSN: | 1996-1944 |
| Published: |
MDPI AG
2024
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa65848 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Organically coated steels are widely used in applications in which they are subjected to the natural environment and therefore require excellent corrosion resistance. Organic clearcoats are typically employed as a barrier that improves the overall corrosion resistance; however, they are typically derived from fossil fuel-based feedstock. A more sustainable alternative could be possible using sol–gel coatings. The application of a simple tetraethoxysilane (TEOS)-based sol–gel was applied to polyurethane-coated steels using a spray coater. The concentration of TEOS was altered to produce coatings containing either 2.5% or 10%. The 10% TEOS resulted in dense, homogeneous coatings that offered a significant improvement in corrosion resistance compared to an uncoated substrate. Whereas the 2.5% TEOS coatings were inhomogeneous and porous, which indicated a limitation of concentration required to produce a uniform coating. The successful demonstration of using a simple TEOS-based coating to improve the corrosion resistance of organically coated steel highlights the potential for further investigation into the use of sol–gels for these applications. |
|---|---|
| Keywords: |
sol–gel; coatings; corrosion; barrier; coil coating |
| College: |
Faculty of Science and Engineering |
| Funders: |
This work was made possible by the Engineering and Physical Science Research Council (EP/S02252X/1), Innovate UK and by the European Regional Development Fund through the Welsh Government. The authors would like to thank the Materials and Manufacturing Academy and COATED CDT (COATED M2A) in Swansea University, Engineering and Physical Sciences Research Council (EPSRC via UKRI), the European Social Fund via the Welsh Government and TATA Steel UK for supporting the work described in this article. SEM facilities were provided by the Swansea University AIM Facility, funded in part by the EPSRC. Thanks also to NSG Pilkinton for providing spray coating facilities. |
| Issue: |
5 |
| Start Page: |
1075 |