Journal article 588 views 30 downloads
Economic analysis of integrating photovoltaics and battery energy storage system in an office building
Energy and Buildings, Volume: 284, Start page: 112885
Swansea University Authors: Guangling Zhao, Joanna Morgan, Justin Searle , Richard Lewis, Jenny Baker
-
PDF | Accepted Manuscript
©2023 All rights reserved. All article content, except where otherwise noted, is licensed under a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND)
Download (734.64KB)
DOI (Published version): 10.1016/j.enbuild.2023.112885
Abstract
The concept of ‘Active Building’ refers to any building, such as factories, offices, homes, and other structures in the built environment, which are equipped to conserve, generate, store, and release energy in the UK. One such Active Building was built at Swansea University in the UK in 2018 and is...
Published in: | Energy and Buildings |
---|---|
ISSN: | 0378-7788 |
Published: |
Elsevier BV
2023
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa62676 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
The concept of ‘Active Building’ refers to any building, such as factories, offices, homes, and other structures in the built environment, which are equipped to conserve, generate, store, and release energy in the UK. One such Active Building was built at Swansea University in the UK in 2018 and is currently used as a small office including well fare facilities. The objective of this study is to analyse the economic performance of an Active Building, incorporating building-integrated photovoltaics (BIPV) and lithium-ion (Li-ion) batteries with real building operational profiles and metered energy load profiles. The cost covers the capital cost of 22 kWp BIPV and 110 kWh Li-ion battery, and electricity cost from the electric grid with two types of time of use electricity tariffs - South Wales (SW) time of use tariff and Red, Amber, and Green (RAG) rates, and the potential carbon cost of electricity supplied from the Wales electric grid and generated from the Active Building. Four battery operational strategies are designed, and battery status of charge and electricity flow are monitored. The analysis is undertaken on the BIPV units with or without Li-ion batteries under various scenarios. The results show that the investment of BIPV units without Li-ion batteries can make a profit within the lifetime of BIPV in the current electricity market. However, the current Li-ion battery storage does not compensate for its capital cost from the reduced economic value obtained from the BIPV system when the electricity is curtailed. Even though the current economic analysis of the Active Building installing BIPV and battery is not convincing at the current capital price, this combination can enable the Active Building to be independent of the electric grid and to balance electricity demand and generation itself. The analysis will demonstrate the market conditions required to make these operational benefits cost-effective. |
---|---|
Keywords: |
Economic Analysis; BIPV; LFP battery storage; Active building |
College: |
Faculty of Science and Engineering |
Funders: |
This work has received funding from the Engineering and Physical Sciences Research Council (EPSRC) through ECR Fellowship NoRESt (EP/ S03711X/1) and SPECIFIC Innovation and Knowledge Centre (EP/ N020863/1 and EP/P030831/1). EP/T028513/1 Application Targeted and Integrated Photovoltaics - Enhancing UK Capability in Solar. |
Start Page: |
112885 |