Journal article 1251 views 249 downloads
3D Printed SnSe Thermoelectric Generators with High Figure of Merit
,
Matthew Burton ,
Shahin Mehraban,
David Beynon,
James McGettrick,
Trystan Watson ,
Nicholas Lavery ,
Matt Carnie
Advanced Energy Materials, Volume: 9, Issue: 26
Swansea University Authors:
David Beynon , Matthew Burton , Trystan Watson , Nicholas Lavery , Matt Carnie
-
PDF | Version of Record
Distributed under the terms of a Creative Commons Attribution (CC-BY) Licence.
Download (2.8MB)
DOI (Published version): 10.1002/aenm.201900201
Abstract
Since the discovery of the record figure of merit (ZT) of 2.6 ± 0.3 in tin selenide (SnSe), the material has attracted much attention in the field of thermoelectrics. This paper reports a novel pseudo‐3D printing technique to fabricate bulk SnSe thermoelectric elements, allowing for the fabrication...
| Published in: | Advanced Energy Materials |
|---|---|
| ISSN: | 1614-6832 1614-6840 |
| Published: |
2019
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa50643 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Since the discovery of the record figure of merit (ZT) of 2.6 ± 0.3 in tin selenide (SnSe), the material has attracted much attention in the field of thermoelectrics. This paper reports a novel pseudo‐3D printing technique to fabricate bulk SnSe thermoelectric elements, allowing for the fabrication of standard configuration thermoelectric generators. In contrast to fabrication examples presented to date, this technique is potentially very low‐cost and allows for facile, scalable, and rapid fabrication. Bulk SnSe thermoelectric elements are produced and characterized over a wide range of temperatures. An element printed from an ink with 4% organic binder produces the highest performance, with a ZT value of 1.7 (±0.25) at 758 K. This is the highest ZT reported of any printed thermoelectric material, and the first bulk printed material to operate at this temperature. Finally, a proof‐of‐concept, all printed SnSe thermoelectric generator is presented, producing 20 µW at 772 K. |
|---|---|
| College: |
Faculty of Science and Engineering |
| Issue: |
26 |