Journal article 214 views 47 downloads
Cobalt iron oxide-infused silicone nanocomposites: Magnetoactive materials for remote actuation and sensing
,
Muammer Koç
Nanotechnology Reviews, Volume: 14, Issue: 1
Swansea University Author:
Mokarram Hossain
-
PDF | Version of Record
© 2025 the author(s), published by De Gruyter. This work is licensed under the Creative Commons Attribution 4.0 International License.
Download (6.31MB)
DOI (Published version): 10.1515/ntrev-2025-0194
Abstract
Magnetoactive polymer composites (MAPCs) are promising smart materials owing to their shape-changing behaviour in response to magnetic fields. MAPCs find promising niches in several applications, including soft robotics, sensors, biomedical implants, smart prosthetics, and flexible electronics. Alth...
| Published in: | Nanotechnology Reviews |
|---|---|
| ISSN: | 2191-9097 |
| Published: |
Walter de Gruyter GmbH
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa69963 |
| Abstract: |
Magnetoactive polymer composites (MAPCs) are promising smart materials owing to their shape-changing behaviour in response to magnetic fields. MAPCs find promising niches in several applications, including soft robotics, sensors, biomedical implants, smart prosthetics, and flexible electronics. Although several works have reported the synthesis of magnetic-responsive polymer composites, this work utilizes highly magnetic nanoparticles (i.e. cobalt iron oxide) to produce extremely soft MAPCs. Novel MAPCs were developed using room-temperature vulcanizing (RTV) silicone rubber as the base matrix, incorporating cobalt iron oxide (CoFe2O4, referred to as CIO) nanoparticles as the magnetic filler. Varying concentrations of CIO nanoparticles (0.25, 0.5, 1, and 3%) were used to synthesize isotropic and anisotropic MAPCs. Silicone/CIO MAPCs were characterized for their microstructural, thermal, mechanical, and magnetic properties. An increase in the CIO nanoparticle concentration within the silicone matrix resulted in an improved mechanical performance, where a compressive modulus of 0.199 MPa for silicone/0.25% CIO improved to 0.340 MPa for silicone/3% CIO. Likewise, an improved tensile strength was observed due to particle alignment, resulting in an increase from 1.25 MPa (for isotropic samples) to 1.356 MPa (for anisotropic samples) in silicone/1% CIO MAPCs. Silicone/CIO MAPCs also revealed a higher failure strain than pure silicone samples. Finally, an improvement in the magnetic properties of MAPCs was observed with increasing CIO concentrations, where increased saturation magnetization from 0.087 to 1.057 EMU/g and remanence from 0.054 to 0.625 EMU/g were recorded with an increase in CIO content from 0.25 to 3% in the silicone matrix. The silicone/CIO composites exhibited suitable magnetic responsiveness and mechanical characteristics that make them promising materials for applications in remote actuation and sensing. |
|---|---|
| Keywords: |
MAPCs; soft materials; magnetic response; remote sensing; actuation |
| College: |
Faculty of Science and Engineering |
| Funders: |
M. Hossain acknowledges the support of the EPSRC via a Standard Grant (EP/Z535710/1) and the Royal Society (UK) through the International Exchange Grant (IEC/NSFC/211316). |
| Issue: |
1 |