Journal article 326 views 44 downloads
Thermo-mechanical experimental investigations of 3D-printed elastomeric polyurethane from low to intermediate strain rates
,
Zisheng Liao ,
Mokarram Hossain ,
Guanyu Huang,
Kai Wang,
Xiaohu Yao
Mechanics Research Communications, Volume: 134
Swansea University Author:
Mokarram Hossain
-
PDF | Version of Record
© 2023 The Authors. Published by Elsevier Ltd. Distributed under the terms of a Creative Commons Attribution 4.0 International License (CC BY 4.0).
Download (1.39MB)
DOI (Published version): 10.1016/j.mechrescom.2023.104212
Abstract
Additively manufactured (3D-printed) elastomers have increasing applications in impact resistance devices such as helmets, shoe soles, and shock absorbing architectured metamaterials. These rapidly expanding areas require a proper understanding of the thermo-mechanical behaviours of soft polymers. I...
| Published in: | Mechanics Research Communications |
|---|---|
| ISSN: | 0093-6413 |
| Published: |
Elsevier BV
2023
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa64835 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Additively manufactured (3D-printed) elastomers have increasing applications in impact resistance devices such as helmets, shoe soles, and shock absorbing architectured metamaterials. These rapidly expanding areas require a proper understanding of the thermo-mechanical behaviours of soft polymers. In this contribution, thermal–mechanical properties of 3D-printed elastomeric polyurethane (EPU) are extensively characterised under low to high strain rates which are missing in the literature. The EPU under investigation is digitally manufactured using a Digital Light Synthesis (DLS) technology and is characterised by tensile experiments with a wide range of strain rates spanning from 0.001/s to 500/s and temperature variations of -20 °C to 60 °C. The experimental results reveal deformation nonlinearity, thermal-sensitivity, and strain rate-sensitivity in the elastomer. Moreover, the study reveals the occurrence of the glass transition phenomenon, which is commonly observed in soft materials under low-temperature and high strain-rate conditions. Various graphical illustrations are presented to depict the effects of temperature and strain rate on the stress response. It is observed that as temperature decreases or strain rate increases, the stress amplifies and becomes more sensitive to variations in temperature or strain rate. Additionally, higher strain levels further enhance the stress sensitivity to these variations. The microscopic mechanisms behind the thermal and strain rate sensitivities are discussed, taking into account the influence of the strain level. Overall, this study contributes to a proper understanding of the thermo-mechanical behaviours of digitally-printed soft polymers, particularly in dynamic scenarios. |
|---|---|
| Keywords: |
Digitally-printed polyurethane, Experimental characterisation, Glass transition, Thermal sensitivity, Strain rate sensitivity |
| College: |
Faculty of Science and Engineering |
| Funders: |
This research was funded by the National Science Fund for Distinguished Young Scholar (No. 11925203), the National Natural Science Foundation of China (No. 11672110), the Open Project Program of State Key Laboratory of Traction Power, China under Grant (No. TPL2003), and the financial support from the China Scholarship Council (CSC visiting PhD Fellowship No. 202206150100 to Jie Yang). M Hossain acknowledges the funding by the Swansea Bay City Deal and the European Regional Development Fund through the Welsh European Funding Office. This study is also supported by EPSRC, UK through the Supergen ORE Hub (EP/S000747/1), who have been awarded funding for the Flexible Fund project Submerged bi-axial fatigue analysis for flexible membrane Wave Energy Converters (FF2021-1036). M Hossain also acknowledges the support of the Royal Society through the International Exchange Grant (IEC/NSFC/211316) with the National Natural Science Foundation of China (NSFC). |