Journal article 461 views 36 downloads
Biomass–Coal Hybrid Fuel: A Route to Net-Zero Iron Ore Sintering
,
Ciaran Martin,
Eurig Jones
Sustainability, Volume: 15, Issue: 6, Start page: 5495
Swansea University Authors:
SAM REIS, Peter Holliman , Eurig Jones
-
PDF | Version of Record
Copyright: © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license
Download (4.21MB)
DOI (Published version): 10.3390/su15065495
Abstract
The global steel industry uses fossil fuels to produce millions of tonnes of iron ore sinter each year. Sintering is an energy-intensive process that fuses iron ore and flux to produce material that balances a high mechanical strength at a sufficient particle size to ensure a macroporous burden in t...
| Published in: | Sustainability |
|---|---|
| ISSN: | 2071-1050 |
| Published: |
MDPI AG
2023
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa63005 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
The global steel industry uses fossil fuels to produce millions of tonnes of iron ore sinter each year. Sintering is an energy-intensive process that fuses iron ore and flux to produce material that balances a high mechanical strength at a sufficient particle size to ensure a macroporous burden in the blast furnace to enable rapid gas flow. As significant CO2 greenhouse emissions are emitted, the defossilisation of these CO2 emissions is vital to net-zero carbon targets. Two iterations of a new biomass–coal hybrid fuel (ecoke®(A) and ecoke®(B)) were compared with coke breeze and an anthracite coal using oxygen bomb calorimetry, simultaneous thermal analysis (STA) combining thermogravimetry and differential scanning calorimetry, and isoconversional kinetic modelling and pyrolysis–GCMS to study the volatile matter. The calorific values of both ecoke®(A) and (B) were marginally higher than that of the coke breeze: 27.9 MJ/kg and 27.8 MJ/kg, respectively, compared with 26.5 MJ/kg for the coke breeze. A proximate analysis revealed both ecoke® samples to have higher volatile matter contents (ca. 12–13%) than the coke breeze (7.4%), but less than the anthracite coal (ca. 14%). The thermogravimetric analysis of the burnout kinetics of the fuels heated up to 1000 °C, at heating rates from 5 to 25 °C/min, showed that that the coke breeze and anthracite coal had higher ignition and burnout temperatures than the ecoke® samples. Kinetic analysis using the Freidman and Ozawa methods found that the ecoke® samples showed comparable maximum mass loss rates to the coke breeze but lower activation energies. From these results, both ecoke® samples have the potential to replace some of the coke breeze in the sintering process or EAF processes to help achieve net zero by offsetting up to 30% of the CO2 emissions. |
|---|---|
| Keywords: |
iron ore sintering; net-zero ironmaking; biofuel; thermogravimetry; isoconversional kinetics |
| College: |
Faculty of Science and Engineering |
| Funders: |
EP/S018107/1 (SUSTAIN), EPSRC iCASE 2610332 |
| Issue: |
6 |
| Start Page: |
5495 |