Journal article 178 views 102 downloads
Observation and analysis of diving beetle movements while swimming
Scientific Reports, Volume: 11, Issue: 1
Swansea University Author:
Dunhui Xiao
-
PDF | Version of Record
© The Author(s) 2021. This article is licensed under a Creative Commons Attribution 4.0 International License
Download (2.64MB)
DOI (Published version): 10.1038/s41598-021-96158-1
Abstract
The fast swimming speed, flexible cornering, and high propulsion efficiency of diving beetles are primarily achieved by their two powerful hind legs. Unlike other aquatic organisms, such as turtle, jellyfish, fish and frog et al., the diving beetle could complete retreating motion without turning ar...
| Published in: | Scientific Reports |
|---|---|
| ISSN: | 2045-2322 |
| Published: |
Springer Science and Business Media LLC
2021
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa57944 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
The fast swimming speed, flexible cornering, and high propulsion efficiency of diving beetles are primarily achieved by their two powerful hind legs. Unlike other aquatic organisms, such as turtle, jellyfish, fish and frog et al., the diving beetle could complete retreating motion without turning around, and the turning radius is small for this kind of propulsion mode. However, most bionic vehicles have not contained these advantages, the study about this propulsion method is useful for the design of bionic robots. In this paper, the swimming videos of the diving beetle, including forwarding, turning and retreating, were captured by two synchronized high-speed cameras, and were analyzed via SIMI Motion. The analysis results revealed that the swimming speed initially increased quickly to a maximum at 60% of the power stroke, and then decreased. During the power stroke, the diving beetle stretched its tibias and tarsi, the bristles on both sides of which were shaped like paddles, to maximize the cross-sectional areas against the water to achieve the maximum thrust. During the recovery stroke, the diving beetle rotated its tarsi and folded the bristles to minimize the cross-sectional areas to reduce the drag force. For one turning motion (turn right about 90 degrees), it takes only one motion cycle for the diving beetle to complete it. During the retreating motion, the average acceleration was close to 9.8 m/s2 in the first 25 ms. Finally, based on the diving beetle's hind-leg movement pattern, a kinematic model was constructed, and according to this model and the motion data of the joint angles, the motion trajectories of the hind legs were obtained by using MATLAB. Since the advantages of this propulsion method, it may become a new bionic propulsion method, and the motion data and kinematic model of the hind legs will be helpful in the design of bionic underwater unmanned vehicles. |
|---|---|
| Item Description: |
Author Correction: Observation and analysis of diving beetle movements while swimming: https://doi.org/10.1038/s41598-021-97815-1 |
| College: |
Faculty of Science and Engineering |
| Funders: |
National Key Research and Development Program of China; the National Natural Science Foundation of China; Science and Technology Development Program of Jilin Province |
| Issue: |
1 |