No Cover Image

Journal article 1163 views 649 downloads

Modelling the damage and deformation process in a plastic bonded explosive microstructure under tension using the finite element method

Hari Arora Orcid Logo, E. Tarleton, J. Li-Mayer, M.N. Charalambides, D. Lewis

Computational Materials Science, Volume: 110, Pages: 91 - 101

Swansea University Author: Hari Arora Orcid Logo

Check full text

DOI (Published version): 10.1016/j.commatsci.2015.08.004

Abstract

Modelling the deformation and failure processes occurring in polymer bonded explosives (PBX) and other energetic materials is of great importance for processing methods and lifetime storage purposes. Crystal debonding is undesirable since this can lead to contamination and a reduction in mechanical...

Full description

Published in: Computational Materials Science
ISSN: 0927-0256
Published: 2015
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa37130
Abstract: Modelling the deformation and failure processes occurring in polymer bonded explosives (PBX) and other energetic materials is of great importance for processing methods and lifetime storage purposes. Crystal debonding is undesirable since this can lead to contamination and a reduction in mechanical properties. An insensitive high explosive (PBX-1) was the focus of the study. This binary particulate composite consists of (TATB) filler particles encapsulated in a polymeric binder (KELF800). The particle/matrix interface was characterised with a bi-linear cohesive law, the filler was treated as elastic and the matrix as visco-hyperelastic. Material parameters were determined experimentally for the binder and the cohesive parameters were obtained previously from Williamson et al. (2014) and Gee et al. (2007) for the interface. Once calibrated, the material laws were implemented in a finite element model to allow the macroscopic response of the composite to be simulated. A finite element mesh was generated using a SEM image to identify the filler particles which are represented as a set of 2D polygons. Simulated microstructures were also generated with the same size distribution and volume fraction only with the idealised assumption that the particles are a set of circles in 2D and spheres in 3D. The various model results were compared and a number of other variables were examined for their influence on the global deformation behaviour such as strain rate, cohesive parameters and contrast between filler and matrix modulus. The overwhelming outcome is that the geometry of the particles plays a crucial role in determining the onset of failure and the severity of fracture in relation to whether it is a purely local or global failure. The model was validated against a set of uniaxial tensile tests on PBX-1 and it was found that it predicted the initial modulus and failure stress and strain well.
Keywords: Particulate composites; High volume fraction; Finite element analysis; Micromechanics; Fracture; PBX and viscoelastic matrix composite
Start Page: 91
End Page: 101

Similar Items