Journal article 645 views 75 downloads
Evaluating the effect of a ducted winglet on the induced drag of wind turbine blade using CFD and Trefftz plane analysis
,
Ben Evans ,
JAKUB VINCALEK
Engineering with Computers
Swansea University Authors:
Jakub Vincalek, Sean Walton , Ben Evans , JAKUB VINCALEK
-
PDF | Version of Record
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Download (4.14MB)
DOI (Published version): 10.1007/s00366-023-01817-8
Abstract
A novel patented ducted winglet design is compared, using numerical simulations, to an unmodified wing tip and a standard winglet in the context of a wind turbine blade. The aim of the ducted winglet is to reduce the induced drag. This reduction of induced drag, at the wing tip, would be particularl...
| Published in: | Engineering with Computers |
|---|---|
| ISSN: | 0177-0667 1435-5663 |
| Published: |
Springer Science and Business Media LLC
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa63146 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
A novel patented ducted winglet design is compared, using numerical simulations, to an unmodified wing tip and a standard winglet in the context of a wind turbine blade. The aim of the ducted winglet is to reduce the induced drag. This reduction of induced drag, at the wing tip, would be particularly beneficial to wind turbine performance. Throughout the comparison, we explore the aerodynamic phenomena described in the patent which claim to explain how the ducted winglet reduces induced drag. The simulations were run using a CFD solver, FLITE3D, that has been thoroughly validated on industrial scale aerodynamic problems. A mesh convergence study was carried out to ensure that the results have sufficient numerical accuracy for a consistent ranking with respect to the lift-to-drag ratio. A Trefftz plane analysis is conducted to measure the effect of the duct on induced drag. To the best of our knowledge, this is the first time that such a ducted design is tested in this context and compared to a standard unmodified blade and winglet. We found that the ducted winglet has a higher lift-to-drag ratio than an unmodified wing tip, but lower than a non-ducted winglet. Despite this, there is clear evidence that the duct had a positive influence on the induced drag. Our results show that with future optimisation this ducted winglet may prove beneficial to wind turbine design. |
|---|---|
| Keywords: |
Wind turbine blade, Computational fluid dynamics, Engineering design, Wing tip vortices, Wing wake, Induced drag |
| College: |
Faculty of Science and Engineering |
| Funders: |
EPSRC (EP/S021892/1) |