Journal article 691 views 71 downloads
On the Efficiency Enhancement of an Actively Tunable MEMS Energy Harvesting Device
,
Saber Azizi Azizishirvanshahi,
Hadi Madinei ,
Hamed Haddad Khodaparast
Vibration, Volume: 5, Issue: 3, Pages: 603 - 612
Swansea University Authors:
Saber Azizi Azizishirvanshahi, Hadi Madinei , Hamed Haddad Khodaparast
-
PDF | Version of Record
© 2022 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license
Download (7.33MB)
DOI (Published version): 10.3390/vibration5030035
Abstract
In this paper, we propose an active control method to adjust the resonance frequency of a capacitive energy harvester. To this end, the resonance frequency of the harvester is tuned using an electrostatic force, which is actively controlled by a voltage source. The spring softening effect of the ele...
| Published in: | Vibration |
|---|---|
| ISSN: | 2571-631X |
| Published: |
MDPI AG
2022
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa61472 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
In this paper, we propose an active control method to adjust the resonance frequency of a capacitive energy harvester. To this end, the resonance frequency of the harvester is tuned using an electrostatic force, which is actively controlled by a voltage source. The spring softening effect of the electrostatic force is used to accommodate the dominant frequency of the ambient mechanical vibration within the bandwidth of the resonance region. A single degree of freedom is considered, and the nonlinear equation of motion is numerically integrated over time. Using a conventional proportional–integral–derivative (PID) control mechanism, the results demonstrated that our controller could shift the resonance frequency leftward on the frequency domain and, as a result, improve the efficiency of the energy harvester, provided that the excitation frequency is lower than the resonance frequency of the energy harvester. Application of the PID controller in the resonance zone resulted in pull-in instability, adversely affecting the harvester’s performance. To tackle this problem, we embedded a saturation mechanism in the path of the control signal to prevent a sudden change in motion amplitude. Outside the pull-in band, the saturation of the control signal resulted in the reduction of harvested power compared to the non-saturated signal; this is a promising improvement in the design and analysis of energy harvesting devices. |
|---|---|
| Keywords: |
capacitive energy harvesting; MEMS; PID controller; tunability; base excitation |
| College: |
Faculty of Science and Engineering |
| Funders: |
The paper has received no fundings. |
| Issue: |
3 |
| Start Page: |
603 |
| End Page: |
612 |