Active vibration control of a flexible robot link using piezoelectric actuators

WILLIAMS, DARREN

doi:10.23889/SUthesis.60034

E-Thesis 517 views 325 downloads

Active vibration control of a flexible robot link using piezoelectric actuators / DARREN WILLIAMS

Swansea University Author: DARREN WILLIAMS

PDF | E-Thesis – open access

Copyright: The author, Darren Williams, 2022.
Download (19.01MB)

DOI (Published version): 10.23889/SUthesis.60034

Abstract

Nuisance vibrations are a concern throughout the engineering realm, and many re-searchers are dedicated to ﬁnding a solution to attenuate them. This research primarily focusses upon the suppression of vibrations in a robot system, with the control system being designed so that it is both aﬀordable a...

Full description

Published:	Swansea 2022
Institution:	Swansea University
Degree level:	Doctoral
Degree name:	Ph.D
Supervisor:	Khodaparast, Hamed H. ; Jiffri, Shakir
URI:	https://cronfa.swan.ac.uk/Record/cronfa60034
Tags:	Add Tag No Tags, Be the first to tag this record!

first_indexed	2022-05-16T10:40:20Z
last_indexed	2022-05-17T03:36:28Z
id	cronfa60034
recordtype	RisThesis
fullrecord	<?xml version="1.0"?><rfc1807><datestamp>2022-05-16T11:53:17.7614356</datestamp><bib-version>v2</bib-version><id>60034</id><entry>2022-05-16</entry><title>Active vibration control of a flexible robot link using piezoelectric actuators</title><swanseaauthors><author><sid>ddaa104b10aa642b1ad77466c47435e6</sid><firstname>DARREN</firstname><surname>WILLIAMS</surname><name>DARREN WILLIAMS</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2022-05-16</date><abstract>Nuisance vibrations are a concern throughout the engineering realm, and many re-searchers are dedicated to ﬁnding a solution to attenuate them. This research primarily focusses upon the suppression of vibrations in a robot system, with the control system being designed so that it is both aﬀordable and lightweight. Such constraints aim to provide a solution that may be utilised in a variety of applications. The utilisation of piezoelectric elements as both actuators and sensors provides several advantages in that they are lightweight, easily integrated into an existing system and have a good force to weight ratio when used as actuators. To read and control these elements a single board computer was employed, in acknowledgement of the constraining parameters of the design. The amalgamation of vibration control and robotics has lent to the re-search being conducted with separate objectives set, isolating certain elements of the overall system design for validation. Ultimately, these separate investigations progress to the integration of the robot and control systems prior to further research concerning nonlinear vibrations, dynamic control and the discrete-time domain modelling of the system.This research ﬁrst investigates the viability of the chosen components as a vibration attenuation solution. In addition, analytical models of the system have been created, for two types of sensors to determine the most eﬀective; an inertial measurement unit and a collocated pair of piezoelectric sensors. These models are based on Euler-Bernoulli beam theory and aim to validate the control theory through a comparison of the experimental data. These experiments isolate the vibration problem from a robot system through the investigation of the control of a long slender beam envisioned as a robot manipulator link, but excited using a shaker platform in a sinusoidal manner. An observation of the theory related to the voltage produced by the piezoelectric elements, suggests that even with the application of only proportional control by the system, the controlled output would have components indicative of both proportional and derivative control. This observation and the underlying theory are further analysed within this research.The next objectives are to compare the performance of the control system developed in this research which utilises a Raspberry Pi 3B+ [1] with one that employs a dSPACE MicroLabBox [2], and to determine the suitability of the former for use with robot sys-tems. With the former ensuring that the constraints placed on the design, those which inﬂuenced the selection of the components, does not conclude to the dSPACE Micro-LabBox system being overtly preferable. The latter investigates both the impact of the system’s inclusion on the functionality of the system and the system’s perform-ance with respect to the intended application. The KUKA LBR iiwa 7 R800 [3] robot manipulator is utilised to satisfy this objective, wherein the link is mounted on the end eﬀector of the manipulator acting as an eighth link. The ﬁnal investigation in this research pertains to the attenuation of nonlinear vibrations experienced by a robot manipulator link. Additional components were added to the link to induce a geometric nonlinearity in the system. An analytical model of the amended system was created to validate the theory through comparison with experimental results. The control system was employed for multiple cases to ascertain the level of its performance with regards to the suppression of nonlinear vibrations.</abstract><type>E-Thesis</type><journal/><volume/><journalNumber/><paginationStart/><paginationEnd/><publisher/><placeOfPublication>Swansea</placeOfPublication><isbnPrint/><isbnElectronic/><issnPrint/><issnElectronic/><keywords/><publishedDay>16</publishedDay><publishedMonth>5</publishedMonth><publishedYear>2022</publishedYear><publishedDate>2022-05-16</publishedDate><doi>10.23889/SUthesis.60034</doi><url/><notes>ORCiD identifier: https://orcid.org/0000-0003-3433-0326</notes><college>COLLEGE NANME</college><CollegeCode>COLLEGE CODE</CollegeCode><institution>Swansea University</institution><supervisor>Khodaparast, Hamed H. ; Jiffri, Shakir</supervisor><degreelevel>Doctoral</degreelevel><degreename>Ph.D</degreename><degreesponsorsfunders>EPSRC doctoral training grant</degreesponsorsfunders><apcterm/><lastEdited>2022-05-16T11:53:17.7614356</lastEdited><Created>2022-05-16T11:36:56.6717195</Created><path><level id="1">Faculty of Science and Engineering</level><level id="2">School of Engineering and Applied Sciences - Uncategorised</level></path><authors><author><firstname>DARREN</firstname><surname>WILLIAMS</surname><order>1</order></author></authors><documents><document><filename>60034__24091__539eba11195b4311a02f4cffc3a895a4.pdf</filename><originalFilename>Williams_Darren_PhD_Thesis_Final_Redacted_Signature.pdf</originalFilename><uploaded>2022-05-16T11:46:11.9710515</uploaded><type>Output</type><contentLength>19937897</contentLength><contentType>application/pdf</contentType><version>E-Thesis – open access</version><cronfaStatus>true</cronfaStatus><documentNotes>Copyright: The author, Darren Williams, 2022.</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language></document></documents><OutputDurs/></rfc1807>
spelling	2022-05-16T11:53:17.7614356 v2 60034 2022-05-16 Active vibration control of a flexible robot link using piezoelectric actuators ddaa104b10aa642b1ad77466c47435e6 DARREN WILLIAMS DARREN WILLIAMS true false 2022-05-16 Nuisance vibrations are a concern throughout the engineering realm, and many re-searchers are dedicated to ﬁnding a solution to attenuate them. This research primarily focusses upon the suppression of vibrations in a robot system, with the control system being designed so that it is both aﬀordable and lightweight. Such constraints aim to provide a solution that may be utilised in a variety of applications. The utilisation of piezoelectric elements as both actuators and sensors provides several advantages in that they are lightweight, easily integrated into an existing system and have a good force to weight ratio when used as actuators. To read and control these elements a single board computer was employed, in acknowledgement of the constraining parameters of the design. The amalgamation of vibration control and robotics has lent to the re-search being conducted with separate objectives set, isolating certain elements of the overall system design for validation. Ultimately, these separate investigations progress to the integration of the robot and control systems prior to further research concerning nonlinear vibrations, dynamic control and the discrete-time domain modelling of the system.This research ﬁrst investigates the viability of the chosen components as a vibration attenuation solution. In addition, analytical models of the system have been created, for two types of sensors to determine the most eﬀective; an inertial measurement unit and a collocated pair of piezoelectric sensors. These models are based on Euler-Bernoulli beam theory and aim to validate the control theory through a comparison of the experimental data. These experiments isolate the vibration problem from a robot system through the investigation of the control of a long slender beam envisioned as a robot manipulator link, but excited using a shaker platform in a sinusoidal manner. An observation of the theory related to the voltage produced by the piezoelectric elements, suggests that even with the application of only proportional control by the system, the controlled output would have components indicative of both proportional and derivative control. This observation and the underlying theory are further analysed within this research.The next objectives are to compare the performance of the control system developed in this research which utilises a Raspberry Pi 3B+ [1] with one that employs a dSPACE MicroLabBox [2], and to determine the suitability of the former for use with robot sys-tems. With the former ensuring that the constraints placed on the design, those which inﬂuenced the selection of the components, does not conclude to the dSPACE Micro-LabBox system being overtly preferable. The latter investigates both the impact of the system’s inclusion on the functionality of the system and the system’s perform-ance with respect to the intended application. The KUKA LBR iiwa 7 R800 [3] robot manipulator is utilised to satisfy this objective, wherein the link is mounted on the end eﬀector of the manipulator acting as an eighth link. The ﬁnal investigation in this research pertains to the attenuation of nonlinear vibrations experienced by a robot manipulator link. Additional components were added to the link to induce a geometric nonlinearity in the system. An analytical model of the amended system was created to validate the theory through comparison with experimental results. The control system was employed for multiple cases to ascertain the level of its performance with regards to the suppression of nonlinear vibrations. E-Thesis Swansea 16 5 2022 2022-05-16 10.23889/SUthesis.60034 ORCiD identifier: https://orcid.org/0000-0003-3433-0326 COLLEGE NANME COLLEGE CODE Swansea University Khodaparast, Hamed H. ; Jiffri, Shakir Doctoral Ph.D EPSRC doctoral training grant 2022-05-16T11:53:17.7614356 2022-05-16T11:36:56.6717195 Faculty of Science and Engineering School of Engineering and Applied Sciences - Uncategorised DARREN WILLIAMS 1 60034__24091__539eba11195b4311a02f4cffc3a895a4.pdf Williams_Darren_PhD_Thesis_Final_Redacted_Signature.pdf 2022-05-16T11:46:11.9710515 Output 19937897 application/pdf E-Thesis – open access true Copyright: The author, Darren Williams, 2022. true eng
title	Active vibration control of a flexible robot link using piezoelectric actuators
spellingShingle	Active vibration control of a flexible robot link using piezoelectric actuators DARREN WILLIAMS
title_short	Active vibration control of a flexible robot link using piezoelectric actuators
title_full	Active vibration control of a flexible robot link using piezoelectric actuators
title_fullStr	Active vibration control of a flexible robot link using piezoelectric actuators
title_full_unstemmed	Active vibration control of a flexible robot link using piezoelectric actuators
title_sort	Active vibration control of a flexible robot link using piezoelectric actuators
author_id_str_mv	ddaa104b10aa642b1ad77466c47435e6
author_id_fullname_str_mv	ddaa104b10aa642b1ad77466c47435e6_***_DARREN WILLIAMS
author	DARREN WILLIAMS
author2	DARREN WILLIAMS
format	E-Thesis
publishDate	2022
institution	Swansea University
doi_str_mv	10.23889/SUthesis.60034
college_str	Faculty of Science and Engineering
hierarchytype
hierarchy_top_id	facultyofscienceandengineering
hierarchy_top_title	Faculty of Science and Engineering
hierarchy_parent_id	facultyofscienceandengineering
hierarchy_parent_title	Faculty of Science and Engineering
department_str	School of Engineering and Applied Sciences - Uncategorised{{{_:::_}}}Faculty of Science and Engineering{{{_:::_}}}School of Engineering and Applied Sciences - Uncategorised
document_store_str	1
active_str	0
description	Nuisance vibrations are a concern throughout the engineering realm, and many re-searchers are dedicated to ﬁnding a solution to attenuate them. This research primarily focusses upon the suppression of vibrations in a robot system, with the control system being designed so that it is both aﬀordable and lightweight. Such constraints aim to provide a solution that may be utilised in a variety of applications. The utilisation of piezoelectric elements as both actuators and sensors provides several advantages in that they are lightweight, easily integrated into an existing system and have a good force to weight ratio when used as actuators. To read and control these elements a single board computer was employed, in acknowledgement of the constraining parameters of the design. The amalgamation of vibration control and robotics has lent to the re-search being conducted with separate objectives set, isolating certain elements of the overall system design for validation. Ultimately, these separate investigations progress to the integration of the robot and control systems prior to further research concerning nonlinear vibrations, dynamic control and the discrete-time domain modelling of the system.This research ﬁrst investigates the viability of the chosen components as a vibration attenuation solution. In addition, analytical models of the system have been created, for two types of sensors to determine the most eﬀective; an inertial measurement unit and a collocated pair of piezoelectric sensors. These models are based on Euler-Bernoulli beam theory and aim to validate the control theory through a comparison of the experimental data. These experiments isolate the vibration problem from a robot system through the investigation of the control of a long slender beam envisioned as a robot manipulator link, but excited using a shaker platform in a sinusoidal manner. An observation of the theory related to the voltage produced by the piezoelectric elements, suggests that even with the application of only proportional control by the system, the controlled output would have components indicative of both proportional and derivative control. This observation and the underlying theory are further analysed within this research.The next objectives are to compare the performance of the control system developed in this research which utilises a Raspberry Pi 3B+ [1] with one that employs a dSPACE MicroLabBox [2], and to determine the suitability of the former for use with robot sys-tems. With the former ensuring that the constraints placed on the design, those which inﬂuenced the selection of the components, does not conclude to the dSPACE Micro-LabBox system being overtly preferable. The latter investigates both the impact of the system’s inclusion on the functionality of the system and the system’s perform-ance with respect to the intended application. The KUKA LBR iiwa 7 R800 [3] robot manipulator is utilised to satisfy this objective, wherein the link is mounted on the end eﬀector of the manipulator acting as an eighth link. The ﬁnal investigation in this research pertains to the attenuation of nonlinear vibrations experienced by a robot manipulator link. Additional components were added to the link to induce a geometric nonlinearity in the system. An analytical model of the amended system was created to validate the theory through comparison with experimental results. The control system was employed for multiple cases to ascertain the level of its performance with regards to the suppression of nonlinear vibrations.
published_date	2022-05-16T04:17:48Z
_version_	1763754186677157888
score	11.037319

Active vibration control of a flexible robot link using piezoelectric actuators / DARREN WILLIAMS

Similar Items