The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics

Tsampanakis, Ioannis; White, Alvin Orbaek

doi:10.3390/polym14010112

Journal article 628 views 154 downloads

The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics

Ioannis Tsampanakis, Alvin Orbaek White

Polymers, Volume: 14, Issue: 1, Start page: 112

Swansea University Authors: Ioannis Tsampanakis, Alvin Orbaek White

PDF | Version of Record

© 2021 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license
Download (957.91KB)

Check full text

DOI (Published version): 10.3390/polym14010112

Abstract

The inherent value and use of hydrocarbons from waste plastics and solvents can be extended through open-loop chemical recycling, as this process converts plastic to a range of non-plastic materials. This process is enhanced by first creating plastic−solvent combinations from multiple sources, which...

Full description

Published in:	Polymers
ISSN:	2073-4360
Published:	MDPI AG 2021
Online Access:	Check full text
URI:	https://cronfa.swan.ac.uk/Record/cronfa59073

first_indexed	2022-01-04T16:45:16Z
last_indexed	2022-01-20T04:30:36Z
id	cronfa59073
recordtype	SURis
fullrecord	<?xml version="1.0"?><rfc1807><datestamp>2022-01-19T16:31:28.2282603</datestamp><bib-version>v2</bib-version><id>59073</id><entry>2022-01-04</entry><title>The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics</title><swanseaauthors><author><sid>781af6e0d2ee632a1943c88f3a526baa</sid><firstname>Ioannis</firstname><surname>Tsampanakis</surname><name>Ioannis Tsampanakis</name><active>true</active><ethesisStudent>false</ethesisStudent></author><author><sid>8414a23650d4403fdfe1a735dbd2e24e</sid><ORCID>0000-0001-6338-5970</ORCID><firstname>Alvin</firstname><surname>Orbaek White</surname><name>Alvin Orbaek White</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2022-01-04</date><abstract>The inherent value and use of hydrocarbons from waste plastics and solvents can be extended through open-loop chemical recycling, as this process converts plastic to a range of non-plastic materials. This process is enhanced by first creating plastic−solvent combinations from multiple sources, which then are streamlined through a single process stream. We report on the relevant mechanics for streamlining industrially relevant polymers such as polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and acrylonitrile butadiene styrene (ABS) into chemical slurries mixed with various organic solvents such as toluene, xylene, and cyclohexane. The miscibility of the polymer feedstock within the solvent was evaluated using the Relative Energy Difference method, and the dissolution process was evaluated using the “Molecular theories in a continuum framework” model. These models were used to design a batch process yielding 1 tonne/h slurry by setting appropriate assumptions including constant viscosity of solvents, disentanglement-controlled dissolution mechanism, and linear increase in the dissolved polymer’s mass fraction over time. Solvent selection was found to be the most critical parameter for the dissolution process. The characteristics of the ideal solvent are high affinity to the desired polymer and low viscosity. This work serves as a universal technical guideline for the open-loop chemical recycling of plastics, avoiding the growth of waste plastic by utilising them as a carbon feedstock towards a circular economy framework.</abstract><type>Journal Article</type><journal>Polymers</journal><volume>14</volume><journalNumber>1</journalNumber><paginationStart>112</paginationStart><paginationEnd/><publisher>MDPI AG</publisher><placeOfPublication/><isbnPrint/><isbnElectronic/><issnPrint/><issnElectronic>2073-4360</issnElectronic><keywords>plastic waste, chemical recycling, mathematical modelling, carbon feedstock, circular economy, open-loop recycling, acrylonitrile butadiene styrene, polystyrene, toluene</keywords><publishedDay>29</publishedDay><publishedMonth>12</publishedMonth><publishedYear>2021</publishedYear><publishedDate>2021-12-29</publishedDate><doi>10.3390/polym14010112</doi><url/><notes/><college>COLLEGE NANME</college><CollegeCode>COLLEGE CODE</CollegeCode><institution>Swansea University</institution><apcterm/><funders>A.O.W. is funded through the Sêr Cymru II Fellowship by the Welsh Government and the European Regional Development Fund (ERDF). A.O.W. acknowledges funding from the Welsh Government Circular Economy Capital Fund FY 2020-21. I.T. is funded by the Knowledge Economy Skills Scholarships (KESS). KESS is a pan-Wales higher level skills initiative led by Bangor University on behalf of the HE sector in Wales. It is part funded by the Welsh Government’s European Social Fund (ESF) convergence programme for West Wales and the Valleys. I.T. is part funded by TRIMTABS Ltd. through the KESS2 program.</funders><lastEdited>2022-01-19T16:31:28.2282603</lastEdited><Created>2022-01-04T16:41:16.8268183</Created><path><level id="1">Faculty of Science and Engineering</level><level id="2">School of Engineering and Applied Sciences - Uncategorised</level></path><authors><author><firstname>Ioannis</firstname><surname>Tsampanakis</surname><order>1</order></author><author><firstname>Alvin</firstname><surname>Orbaek White</surname><orcid>0000-0001-6338-5970</orcid><order>2</order></author></authors><documents><document><filename>59073__22013__5344f59c51ad40df874d7c0f2f1e1533.pdf</filename><originalFilename>polymers-14-00112.pdf</originalFilename><uploaded>2022-01-04T16:41:16.8267879</uploaded><type>Output</type><contentLength>980903</contentLength><contentType>application/pdf</contentType><version>Version of Record</version><cronfaStatus>true</cronfaStatus><documentNotes>© 2021 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language><licence>https://creativecommons.org/licenses/by/4.0/</licence></document></documents><OutputDurs/></rfc1807>
spelling	2022-01-19T16:31:28.2282603 v2 59073 2022-01-04 The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics 781af6e0d2ee632a1943c88f3a526baa Ioannis Tsampanakis Ioannis Tsampanakis true false 8414a23650d4403fdfe1a735dbd2e24e 0000-0001-6338-5970 Alvin Orbaek White Alvin Orbaek White true false 2022-01-04 The inherent value and use of hydrocarbons from waste plastics and solvents can be extended through open-loop chemical recycling, as this process converts plastic to a range of non-plastic materials. This process is enhanced by first creating plastic−solvent combinations from multiple sources, which then are streamlined through a single process stream. We report on the relevant mechanics for streamlining industrially relevant polymers such as polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and acrylonitrile butadiene styrene (ABS) into chemical slurries mixed with various organic solvents such as toluene, xylene, and cyclohexane. The miscibility of the polymer feedstock within the solvent was evaluated using the Relative Energy Difference method, and the dissolution process was evaluated using the “Molecular theories in a continuum framework” model. These models were used to design a batch process yielding 1 tonne/h slurry by setting appropriate assumptions including constant viscosity of solvents, disentanglement-controlled dissolution mechanism, and linear increase in the dissolved polymer’s mass fraction over time. Solvent selection was found to be the most critical parameter for the dissolution process. The characteristics of the ideal solvent are high affinity to the desired polymer and low viscosity. This work serves as a universal technical guideline for the open-loop chemical recycling of plastics, avoiding the growth of waste plastic by utilising them as a carbon feedstock towards a circular economy framework. Journal Article Polymers 14 1 112 MDPI AG 2073-4360 plastic waste, chemical recycling, mathematical modelling, carbon feedstock, circular economy, open-loop recycling, acrylonitrile butadiene styrene, polystyrene, toluene 29 12 2021 2021-12-29 10.3390/polym14010112 COLLEGE NANME COLLEGE CODE Swansea University A.O.W. is funded through the Sêr Cymru II Fellowship by the Welsh Government and the European Regional Development Fund (ERDF). A.O.W. acknowledges funding from the Welsh Government Circular Economy Capital Fund FY 2020-21. I.T. is funded by the Knowledge Economy Skills Scholarships (KESS). KESS is a pan-Wales higher level skills initiative led by Bangor University on behalf of the HE sector in Wales. It is part funded by the Welsh Government’s European Social Fund (ESF) convergence programme for West Wales and the Valleys. I.T. is part funded by TRIMTABS Ltd. through the KESS2 program. 2022-01-19T16:31:28.2282603 2022-01-04T16:41:16.8268183 Faculty of Science and Engineering School of Engineering and Applied Sciences - Uncategorised Ioannis Tsampanakis 1 Alvin Orbaek White 0000-0001-6338-5970 2 59073__22013__5344f59c51ad40df874d7c0f2f1e1533.pdf polymers-14-00112.pdf 2022-01-04T16:41:16.8267879 Output 980903 application/pdf Version of Record true © 2021 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license true eng https://creativecommons.org/licenses/by/4.0/
title	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
spellingShingle	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics Ioannis Tsampanakis Alvin Orbaek White
title_short	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
title_full	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
title_fullStr	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
title_full_unstemmed	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
title_sort	The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics
author_id_str_mv	781af6e0d2ee632a1943c88f3a526baa 8414a23650d4403fdfe1a735dbd2e24e
author_id_fullname_str_mv	781af6e0d2ee632a1943c88f3a526baa_*_Ioannis Tsampanakis 8414a23650d4403fdfe1a735dbd2e24e_*_Alvin Orbaek White
author	Ioannis Tsampanakis Alvin Orbaek White
author2	Ioannis Tsampanakis Alvin Orbaek White
format	Journal article
container_title	Polymers
container_volume	14
container_issue	1
container_start_page	112
publishDate	2021
institution	Swansea University
issn	2073-4360
doi_str_mv	10.3390/polym14010112
publisher	MDPI AG
college_str	Faculty of Science and Engineering
hierarchytype
hierarchy_top_id	facultyofscienceandengineering
hierarchy_top_title	Faculty of Science and Engineering
hierarchy_parent_id	facultyofscienceandengineering
hierarchy_parent_title	Faculty of Science and Engineering
department_str	School of Engineering and Applied Sciences - Uncategorised{{{_:::_}}}Faculty of Science and Engineering{{{_:::_}}}School of Engineering and Applied Sciences - Uncategorised
document_store_str	1
active_str	0
description	The inherent value and use of hydrocarbons from waste plastics and solvents can be extended through open-loop chemical recycling, as this process converts plastic to a range of non-plastic materials. This process is enhanced by first creating plastic−solvent combinations from multiple sources, which then are streamlined through a single process stream. We report on the relevant mechanics for streamlining industrially relevant polymers such as polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and acrylonitrile butadiene styrene (ABS) into chemical slurries mixed with various organic solvents such as toluene, xylene, and cyclohexane. The miscibility of the polymer feedstock within the solvent was evaluated using the Relative Energy Difference method, and the dissolution process was evaluated using the “Molecular theories in a continuum framework” model. These models were used to design a batch process yielding 1 tonne/h slurry by setting appropriate assumptions including constant viscosity of solvents, disentanglement-controlled dissolution mechanism, and linear increase in the dissolved polymer’s mass fraction over time. Solvent selection was found to be the most critical parameter for the dissolution process. The characteristics of the ideal solvent are high affinity to the desired polymer and low viscosity. This work serves as a universal technical guideline for the open-loop chemical recycling of plastics, avoiding the growth of waste plastic by utilising them as a carbon feedstock towards a circular economy framework.
published_date	2021-12-29T20:08:45Z
_version_	1821346864140648448
score	11.04748

The Mechanics of Forming Ideal Polymer–Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics

Similar Items