Journal article 1073 views 136 downloads
Experimental validation of an impact off-resonance energy harvester
The European Physical Journal Special Topics, Volume: 228, Issue: 7, Pages: 1635 - 1646
Swansea University Authors:
Michael Friswell, Sondipon Adhikari, Hamed Haddad Khodaparast
-
PDF | Version of Record
Download (944.86KB)
DOI (Published version): 10.1140/epjst/e2019-800155-0
Abstract
Most piezoelectric energy harvesting research has focused on developing on-resonance harvesters that work at low frequencies, even though higher frequencies can generate more power. In addition, conventional resonant harvesters have low efficiency when the excitation frequency is away from resonance...
| Published in: | The European Physical Journal Special Topics |
|---|---|
| ISSN: | 1951-6355 1951-6401 |
| Published: |
2019
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa51630 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Most piezoelectric energy harvesting research has focused on developing on-resonance harvesters that work at low frequencies, even though higher frequencies can generate more power. In addition, conventional resonant harvesters have low efficiency when the excitation frequency is away from resonance. Using mechanical impacts has the potential to improve the overall harvested energy since high frequencies are excited during impacts. Also, the presence of impacts reduces the influence of the base excitation frequency and the requirement to exactly match the resonance frequency. To take advantage of the higher frequency response, an impact energy harvester is designed and validated experimentally. The harvester consists of a cantilever beam with a piezoelectric patch attached to its base which impacts with a stiff object. The harvester is modelled using finite element analysis and a Hertzian contact law. The model is tested and validated in the laboratory using an in-house manufactured demonstrator. Good agreement with the experimental data is obtained, setting the basis for future optimisation of the harvester geometry and piezoelectric properties. |
|---|---|
| College: |
Faculty of Science and Engineering |
| Issue: |
7 |
| Start Page: |
1635 |
| End Page: |
1646 |