Journal article 862 views 452 downloads
Temperature and strain rate dependent large tensile deformation and tensile failure behavior of transparent polyurethane at intermediate strain rates
Zisheng Liao,
Xiaohu Yao,
Longhui Zhang,
Mokarram Hossain 
,
Jiong Wang,
Shuguang Zang
,
Jiong Wang,
Shuguang Zang
International Journal of Impact Engineering, Volume: 129, Pages: 152 - 167
Swansea University Author:
Mokarram Hossain
-
PDF | Accepted Manuscript
Download (5.45MB)
DOI (Published version): 10.1016/j.ijimpeng.2019.03.005
Abstract
Transparent polyurethane has been widely applied in laminated windshield glasses as the interlayer material to enhance the reliability due to its outstanding impact resistance. Under impact loading such as bird strike, the interlayer undergoes large tensile deformation mainly at intermediate strain...
| Published in: | International Journal of Impact Engineering |
|---|---|
| ISSN: | 0734743X |
| Published: |
2019
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa49616 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Transparent polyurethane has been widely applied in laminated windshield glasses as the interlayer material to enhance the reliability due to its outstanding impact resistance. Under impact loading such as bird strike, the interlayer undergoes large tensile deformation mainly at intermediate strain rates (at the order of magnitudes from 100 to 103, excluding 1000/s). In addition, the interlayer is on service over a wide range of temperatures for a plane traveling around the world. The mechanical behavior of transparent polyurethane under these conditions is not fully understood. In this study, systematical experiments were performed on transparent polyurethane. The viscoelasticity of the material was firstly verified by several quasi-static cyclic tests. Then a series of large tensile deformation and tensile failure experiments were conducted under intermediate strain rates and at temperatures of C to C using a servo-hydraulic high-speed tensile machine. All strain data were acquired by the DIC technique. The experimental results show that tensile stress–strain curves and failure behaviors are significantly temperature and strain rate dependent. The rate-temperature equivalence was also observed. Finally, a phenomenological analysis of mechanical quantities of the material was carried out. |
|---|---|
| Keywords: |
Transparent polyurethane, Large tensile deformation, Tensile failure, Temperature dependence, Strain rate dependence, Intermediate strain rate |
| College: |
Faculty of Science and Engineering |
| Start Page: |
152 |
| End Page: |
167 |