Conference Paper/Proceeding/Abstract 913 views
Detection of Strain and Damage Distribution in SiCf/SiC Mechanical Test Coupons
Christopher D. Newton,
J. Paul Jones,
Louise Gale,
Martin Bache
ASME Proceedings: Ceramics, Start page: V006T02A004
Swansea University Author: Martin Bache
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1115/GT2018-75791
Abstract
The complex structural architecture and inherent processing artefacts within ceramic matrix composites combine to induce inhomogeneous deformation and damage prior to ultimate failure. Sophisticated mechanical characterisation is vital in support of a fundamental understanding of deformation in cera...
| Published in: | ASME Proceedings: Ceramics |
|---|---|
| ISBN: | 978-0-7918-5112-8 |
| Published: |
Oslo, Norway
ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition
2018
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa44791 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
The complex structural architecture and inherent processing artefacts within ceramic matrix composites combine to induce inhomogeneous deformation and damage prior to ultimate failure. Sophisticated mechanical characterisation is vital in support of a fundamental understanding of deformation in ceramic matrix composites. On the component scale, “damage tolerant” design and lifing philosophies depend upon laboratory assessments of macro-scale specimens, incorporating typical fibre architectures and matrix under representative stress-strain states.Bulk measurements of strain via extensometry or even localised strain gauging will fail to characterise such inhomogeneity when performing conventional mechanical testing on laboratory scaled coupons. The current research project has, therefore, applied digital image correlation (DIC), electrical resistance monitoring and acoustic emission techniques to the room and high temperature assessment of a SiCf/SiC composite under axial fatigue loading.Data from these separate monitoring techniques plus ancillary use of X-Ray computed tomography and optical inspection were correlated to monitor the onset and progression of damage during cyclic loading. |
|---|---|
| Keywords: |
Mechanical testing, Damage |
| College: |
Faculty of Science and Engineering |
| Start Page: |
V006T02A004 |