No Cover Image

Journal article 1042 views 414 downloads

The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy

G. Liu, J. Salvat Cantó, S. Winwood, K. Rhodes, Soran Birosca Orcid Logo

Acta Materialia, Volume: 148, Pages: 391 - 406

Swansea University Author: Soran Birosca Orcid Logo

  • liu2018.pdf

    PDF | Accepted Manuscript

    Released under the terms of a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND).

    Download (7.98MB)

Check full text

DOI (Published version): 10.1016/j.actamat.2018.01.062

Abstract

Nickel-based superalloy IN713C produced through investment casting route is widely used for turbocharger turbine wheels in the automotive industry. The produced microstructure and microtexture are not homogeneous across the turbine component due to geometrical factors and localised cooling rate duri...

Full description

Published in: Acta Materialia
ISSN: 1359-6454
Published: 2018
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa38362
Tags: Add Tag
No Tags, Be the first to tag this record!
first_indexed 2018-01-31T20:26:00Z
last_indexed 2020-10-07T03:02:51Z
id cronfa38362
recordtype SURis
fullrecord <?xml version="1.0"?><rfc1807><datestamp>2020-10-06T13:47:36.6497159</datestamp><bib-version>v2</bib-version><id>38362</id><entry>2018-01-31</entry><title>The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy</title><swanseaauthors><author><sid>3445603fcc2ff9d27b476a73b223a507</sid><ORCID>0000-0002-8380-771X</ORCID><firstname>Soran</firstname><surname>Birosca</surname><name>Soran Birosca</name><active>true</active><ethesisStudent>false</ethesisStudent></author></swanseaauthors><date>2018-01-31</date><deptcode>EEN</deptcode><abstract>Nickel-based superalloy IN713C produced through investment casting route is widely used for turbocharger turbine wheels in the automotive industry. The produced microstructure and microtexture are not homogeneous across the turbine component due to geometrical factors and localised cooling rate during the casting process, which give rise to inhomogeneous deformation during service. In the present paper, two kinds of in-house fatigue tests, Low Cycle Fatigue (LCF) and High Cycle Fatigue (HCF), were conducted at 600&#x202F;&#xB0;C in attempt to simulate the actual fatigue conditions experienced by turbine wheels in turbocharger. From Geometrically Necessary Dislocation (GND) distributions and strain analyses, it is concluded that microstructure heterogeneity such as carbide precipitates distribution within dendritic structure network determine the failure micromechanics during LCF tests. In the early stage of LCF loading, crack principally initiated within near surface carbides that have been oxidised during high temperature exposure. The higher GND density at the tip of carbide precipitates due to oxidation volume expansion are found to facilitate easy cracks initiation and propagation. Moreover, the cluster-like carbides network and its distribution can accelerate oxidation process and crack growth effectively. Furthermore, in the later stage of crack propagation during LCF, the weak interdendrite areas rotate to accommodate increased strain leading to faster cracks propagation and hence final catastrophic failure. Serial section technique for 3-D visualisation was employed to investigate the crystallographic grain orientation correlation with fracture mechanics during HCF loading. It appears that the microtexure and grain orientations are more critical than the alloy microstructure in an area with a relatively uniform carbides distribution and weak dendrite structure where HCF failure occurred. Based on the slip trace analysis, it was found that most faceting occurred in Goss grains (&lt;110&gt;//LD) and on slip system with the highest Schmid factor. It is concluded that cracks were initiated on planes with high Schmid factors and assisted by the presence of porosity.</abstract><type>Journal Article</type><journal>Acta Materialia</journal><volume>148</volume><paginationStart>391</paginationStart><paginationEnd>406</paginationEnd><publisher/><issnPrint>1359-6454</issnPrint><keywords>IN713C, Fatigue crack, Oxidised carbides, Microtexture, GND</keywords><publishedDay>15</publishedDay><publishedMonth>4</publishedMonth><publishedYear>2018</publishedYear><publishedDate>2018-04-15</publishedDate><doi>10.1016/j.actamat.2018.01.062</doi><url/><notes/><college>COLLEGE NANME</college><department>Engineering</department><CollegeCode>COLLEGE CODE</CollegeCode><DepartmentCode>EEN</DepartmentCode><institution>Swansea University</institution><apcterm/><lastEdited>2020-10-06T13:47:36.6497159</lastEdited><Created>2018-01-31T15:54:10.4518704</Created><path><level id="1">Faculty of Science and Engineering</level><level id="2">School of Engineering and Applied Sciences - Uncategorised</level></path><authors><author><firstname>G.</firstname><surname>Liu</surname><order>1</order></author><author><firstname>J. Salvat</firstname><surname>Cant&#xF3;</surname><order>2</order></author><author><firstname>S.</firstname><surname>Winwood</surname><order>3</order></author><author><firstname>K.</firstname><surname>Rhodes</surname><order>4</order></author><author><firstname>Soran</firstname><surname>Birosca</surname><orcid>0000-0002-8380-771X</orcid><order>5</order></author></authors><documents><document><filename>0038362-31012018155628.pdf</filename><originalFilename>liu2018.pdf</originalFilename><uploaded>2018-01-31T15:56:28.5770000</uploaded><type>Output</type><contentLength>8332937</contentLength><contentType>application/pdf</contentType><version>Accepted Manuscript</version><cronfaStatus>true</cronfaStatus><embargoDate>2019-02-16T00:00:00.0000000</embargoDate><documentNotes>Released under the terms of a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND).</documentNotes><copyrightCorrect>true</copyrightCorrect><language>eng</language></document></documents><OutputDurs/></rfc1807>
spelling 2020-10-06T13:47:36.6497159 v2 38362 2018-01-31 The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy 3445603fcc2ff9d27b476a73b223a507 0000-0002-8380-771X Soran Birosca Soran Birosca true false 2018-01-31 EEN Nickel-based superalloy IN713C produced through investment casting route is widely used for turbocharger turbine wheels in the automotive industry. The produced microstructure and microtexture are not homogeneous across the turbine component due to geometrical factors and localised cooling rate during the casting process, which give rise to inhomogeneous deformation during service. In the present paper, two kinds of in-house fatigue tests, Low Cycle Fatigue (LCF) and High Cycle Fatigue (HCF), were conducted at 600 °C in attempt to simulate the actual fatigue conditions experienced by turbine wheels in turbocharger. From Geometrically Necessary Dislocation (GND) distributions and strain analyses, it is concluded that microstructure heterogeneity such as carbide precipitates distribution within dendritic structure network determine the failure micromechanics during LCF tests. In the early stage of LCF loading, crack principally initiated within near surface carbides that have been oxidised during high temperature exposure. The higher GND density at the tip of carbide precipitates due to oxidation volume expansion are found to facilitate easy cracks initiation and propagation. Moreover, the cluster-like carbides network and its distribution can accelerate oxidation process and crack growth effectively. Furthermore, in the later stage of crack propagation during LCF, the weak interdendrite areas rotate to accommodate increased strain leading to faster cracks propagation and hence final catastrophic failure. Serial section technique for 3-D visualisation was employed to investigate the crystallographic grain orientation correlation with fracture mechanics during HCF loading. It appears that the microtexure and grain orientations are more critical than the alloy microstructure in an area with a relatively uniform carbides distribution and weak dendrite structure where HCF failure occurred. Based on the slip trace analysis, it was found that most faceting occurred in Goss grains (<110>//LD) and on slip system with the highest Schmid factor. It is concluded that cracks were initiated on planes with high Schmid factors and assisted by the presence of porosity. Journal Article Acta Materialia 148 391 406 1359-6454 IN713C, Fatigue crack, Oxidised carbides, Microtexture, GND 15 4 2018 2018-04-15 10.1016/j.actamat.2018.01.062 COLLEGE NANME Engineering COLLEGE CODE EEN Swansea University 2020-10-06T13:47:36.6497159 2018-01-31T15:54:10.4518704 Faculty of Science and Engineering School of Engineering and Applied Sciences - Uncategorised G. Liu 1 J. Salvat Cantó 2 S. Winwood 3 K. Rhodes 4 Soran Birosca 0000-0002-8380-771X 5 0038362-31012018155628.pdf liu2018.pdf 2018-01-31T15:56:28.5770000 Output 8332937 application/pdf Accepted Manuscript true 2019-02-16T00:00:00.0000000 Released under the terms of a Creative Commons Attribution Non-Commercial No Derivatives License (CC-BY-NC-ND). true eng
title The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
spellingShingle The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
Soran Birosca
title_short The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
title_full The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
title_fullStr The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
title_full_unstemmed The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
title_sort The effects of microstructure and microtexture generated during solidification on deformation micromechanism in IN713C nickel-based superalloy
author_id_str_mv 3445603fcc2ff9d27b476a73b223a507
author_id_fullname_str_mv 3445603fcc2ff9d27b476a73b223a507_***_Soran Birosca
author Soran Birosca
author2 G. Liu
J. Salvat Cantó
S. Winwood
K. Rhodes
Soran Birosca
format Journal article
container_title Acta Materialia
container_volume 148
container_start_page 391
publishDate 2018
institution Swansea University
issn 1359-6454
doi_str_mv 10.1016/j.actamat.2018.01.062
college_str Faculty of Science and Engineering
hierarchytype
hierarchy_top_id facultyofscienceandengineering
hierarchy_top_title Faculty of Science and Engineering
hierarchy_parent_id facultyofscienceandengineering
hierarchy_parent_title Faculty of Science and Engineering
department_str School of Engineering and Applied Sciences - Uncategorised{{{_:::_}}}Faculty of Science and Engineering{{{_:::_}}}School of Engineering and Applied Sciences - Uncategorised
document_store_str 1
active_str 0
description Nickel-based superalloy IN713C produced through investment casting route is widely used for turbocharger turbine wheels in the automotive industry. The produced microstructure and microtexture are not homogeneous across the turbine component due to geometrical factors and localised cooling rate during the casting process, which give rise to inhomogeneous deformation during service. In the present paper, two kinds of in-house fatigue tests, Low Cycle Fatigue (LCF) and High Cycle Fatigue (HCF), were conducted at 600 °C in attempt to simulate the actual fatigue conditions experienced by turbine wheels in turbocharger. From Geometrically Necessary Dislocation (GND) distributions and strain analyses, it is concluded that microstructure heterogeneity such as carbide precipitates distribution within dendritic structure network determine the failure micromechanics during LCF tests. In the early stage of LCF loading, crack principally initiated within near surface carbides that have been oxidised during high temperature exposure. The higher GND density at the tip of carbide precipitates due to oxidation volume expansion are found to facilitate easy cracks initiation and propagation. Moreover, the cluster-like carbides network and its distribution can accelerate oxidation process and crack growth effectively. Furthermore, in the later stage of crack propagation during LCF, the weak interdendrite areas rotate to accommodate increased strain leading to faster cracks propagation and hence final catastrophic failure. Serial section technique for 3-D visualisation was employed to investigate the crystallographic grain orientation correlation with fracture mechanics during HCF loading. It appears that the microtexure and grain orientations are more critical than the alloy microstructure in an area with a relatively uniform carbides distribution and weak dendrite structure where HCF failure occurred. Based on the slip trace analysis, it was found that most faceting occurred in Goss grains (<110>//LD) and on slip system with the highest Schmid factor. It is concluded that cracks were initiated on planes with high Schmid factors and assisted by the presence of porosity.
published_date 2018-04-15T03:48:31Z
_version_ 1763752345008603136
score 11.012924

Similar Items