No Cover Image

Journal article 256 views 123 downloads

Characterization and Separation Performance of a Novel Polyethersulfone Membrane Blended with Acacia Gum

Yehia Manawi, Viktor Kochkodan, Ebrahim Mahmoudi, Daniel Johnson Orcid Logo, Abdul Wahab Mohammad, Muataz Ali Atieh

Scientific Reports, Volume: 7, Issue: 1

Swansea University Author: Daniel Johnson Orcid Logo

Abstract

Novel polyethersulfone (PES) membranes blended with 0.1–3.0 wt. % of Acacia gum (AG) as a pore-former and antifouling agent were fabricated using phase inversion technique. The effect of AG on the pore-size, porosity, surface morphology, surface charge, hydrophilicity, and mechanical properties of P...

Full description

Published in: Scientific Reports
ISSN: 2045-2322
Published: 2017
Online Access: Check full text

URI: https://cronfa.swan.ac.uk/Record/cronfa37328
Tags: Add Tag
No Tags, Be the first to tag this record!
Abstract: Novel polyethersulfone (PES) membranes blended with 0.1–3.0 wt. % of Acacia gum (AG) as a pore-former and antifouling agent were fabricated using phase inversion technique. The effect of AG on the pore-size, porosity, surface morphology, surface charge, hydrophilicity, and mechanical properties of PES/AG membranes was studied by scanning electron microscopy (SEM), Raman spectroscopy, contact angle and zeta potential measurements. The antifouling -properties of PES/AG membranes were evaluated using Escherichia coli bacteria and bovine serum albumine (BSA). The use of AG as an additive to PES membranes was found to increase the surface charge, hydrophilicity (by 20%), porosity (by 77%) and permeate flux (by about 130%). Moreover, PES/AG membranes demonstrated higher antifouling and tensile stress (by 31%) when compared to pure PES membranes. It was shown that the prepared PES/AG membranes efficiently removed lead ions from aqueous solutions. Both the sieving mechanism of the membrane and chelation of lead with AG macromolecules incorporated in the membrane matrix contributed to lead removal. The obtained results indicated that AG can be used as a novel pore-former, hydrophilizing and antifouling agent, as well as an enhancer to the mechanical and rejection properties of the PES membranes.
Keywords: Environmental impact, Soft materials
College: Faculty of Science and Engineering
Issue: 1