Journal article 1355 views 1082 downloads
Minimising the ohmic resistance of an alkaline electrolysis cell through effective cell design
Robert Phillips,
Adam Edwards,
Bertrand Rome,
Daniel R. Jones,
Charles W. Dunnill,
Charlie Dunnill 
International Journal of Hydrogen Energy, Volume: 42, Issue: 38, Pages: 23986 - 23994
Swansea University Author:
Charlie Dunnill
-
PDF | Accepted Manuscript
Download (1.26MB)
DOI (Published version): 10.1016/j.ijhydene.2017.07.184
Abstract
The efficiency of an alkaline electrolysis cell depends strongly on its internal cell resistance, which becomes the dominant efficiency driver at high current densities. This paper uses Electrochemical Impedance Spectroscopy to decouple the ohmic resistance from the cell voltage, and, for the first...
| Published in: | International Journal of Hydrogen Energy |
|---|---|
| ISSN: | 03603199 |
| Published: |
2017
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa34946 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
The efficiency of an alkaline electrolysis cell depends strongly on its internal cell resistance, which becomes the dominant efficiency driver at high current densities. This paper uses Electrochemical Impedance Spectroscopy to decouple the ohmic resistance from the cell voltage, and, for the first time, quantify the reduction in cell resistance achieved by employing a zero gap cell configuration when compared to the conventional approach. A 30% reduction in ohmic resistance is demonstrated for the zero gap cell when compared to a more conventional design with a 2 mm electrode gap (in 1 M NaOH and at standard conditions). The effect on the ohmic resistance of operating parameters, including current density and temperature, is quantified; the zero gap cell outperforms the standard cell at all current densities, particularly above 500 mA·cm−2 Furthermore, the effect of electrode morphology on the ohmic resistance is investigated, showing that high surface area foam electrodes permit a lower ohmic resistance than coarser mesh electrodes. These results show that zero gap cell design will allow both low cost and highly efficient alkaline electrolysis, which will become a key technology for short term and inter-seasonal energy storage and accelerate the transition towards a decarbonised society. |
|---|---|
| Keywords: |
Alkaline electrolysis; Electrochemical impedance spectroscopy; Zero gap; Porous electrodes; Renewable energy storage |
| College: |
Faculty of Science and Engineering |
| Issue: |
38 |
| Start Page: |
23986 |
| End Page: |
23994 |