Journal article 1623 views 425 downloads
Creep Deformation by Dislocation Movement in Waspaloy
Materials, Volume: 10, Issue: 1, Start page: 61
Swansea University Authors: Mark Whittaker , Will Harrison
-
PDF | Version of Record
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
Download (10.12MB)
DOI (Published version): 10.3390/ma10010061
Abstract
Creep tests of the polycrystalline nickel alloy Waspaloy have been conducted at Swansea University, for varying stress conditions at 700 ◦C. Investigation through use of Transmission Electron Microscopy at Cambridge University has examined the dislocation networks formed under these conditions, with...
Published in: | Materials |
---|---|
ISSN: | 1996-1944 |
Published: |
2017
|
Online Access: |
Check full text
|
URI: | https://cronfa.swan.ac.uk/Record/cronfa31621 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Abstract: |
Creep tests of the polycrystalline nickel alloy Waspaloy have been conducted at Swansea University, for varying stress conditions at 700 ◦C. Investigation through use of Transmission Electron Microscopy at Cambridge University has examined the dislocation networks formed under these conditions, with particular attention paid to comparing tests performed above and below the yield stress. This paper highlights how the dislocation structures vary throughout creep and proposes a dislocation mechanism theory for creep in Waspaloy. Activation energies are calculated through approaches developed in the use of the recently formulated Wilshire Equations, and are found to differ above and below the yield stress. Low activation energies are found to be related to dislocation interaction with γ 0 precipitates below the yield stress. However, significantly increased dislocation densities at stresses above yield cause an increase in the activation energy values as forest hardening becomes the primary mechanism controlling dislocation movement. It is proposed that the activation energy change is related to the stress increment provided by work hardening, as can be observed from Ti, Ni and steel results. |
---|---|
College: |
Faculty of Science and Engineering |
Issue: |
1 |
Start Page: |
61 |