Journal article 1608 views
Material and process optimization screen printing carbon graphite pastes for mass production of heating elements
Bruce Philip,
Eifion Jewell 
,
Peter Greenwood,
Chris Weirman
,
Peter Greenwood,
Chris Weirman
Journal of Manufacturing Processes, Volume: 22, Pages: 185 - 191
Swansea University Author:
Eifion Jewell
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1016/j.jmapro.2016.03.001
Abstract
An experimental development programme has been carried out for the production of resistive heated panels to be used in raised access flooring. Screen printing was used as the means of depositing the heating element and the paper examines the means by which the process is optimised from assessment of...
| Published in: | Journal of Manufacturing Processes |
|---|---|
| ISSN: | 1526-6125 |
| Published: |
2016
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa27697 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
An experimental development programme has been carried out for the production of resistive heated panels to be used in raised access flooring. Screen printing was used as the means of depositing the heating element and the paper examines the means by which the process is optimised from assessment of material formulations through to a pilot production run of 300 tiles. A material with a sheet resistances of 35 /sq., when printed through a 77-48 polyester mesh was selected by examining its rheological and drying behaviour. Higher film thickness with coarser screens was not possible as this incurred topological variations in the printed film and required excessive drying times. During a pilot manufacturing run of 300 panels, process drift was observed and this was attributed to squeegee softening due to solvent absorption. The generic findings of the study are applicable to many applications where screen printing is used for the continuous deposition of materials where the characteristics of the deposit and its subsequent curing is paramount such as sensor, third generation PV and circuit boards. |
|---|---|
| Keywords: |
screen printing, carbon graphite paste, underfloor heating |
| College: |
Faculty of Science and Engineering |
| Start Page: |
185 |
| End Page: |
191 |