Journal article 1245 views
An investigation into plate deformation in flexographic printing
,
Mark Bohan
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume: 218, Issue: 11, Pages: 1499 - 1511
Swansea University Authors:
David Bould, Tim Claypole , Mark Bohan
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1243/0954405042418428
Abstract
Deformation of the flexographic printing plate is an important factor in determining the quality of the printed image. A numerical model of the individual dots has been developed and used to examine the deformation of the plate under a range of printing conditions and image characteristics. Two mech...
| Published in: | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture |
|---|---|
| ISSN: | 0954-4054 2041-2975 |
| Published: |
SAGE Publications
2004
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa1815 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
Deformation of the flexographic printing plate is an important factor in determining the quality of the printed image. A numerical model of the individual dots has been developed and used to examine the deformation of the plate under a range of printing conditions and image characteristics. Two mechanisms have been identified for the deformation of the image on the plate: expansion of the dot surface and dot barrelling. These results have been combined with those from an experimental study to apportion the dot gain due to ink spreading and physical deformation of the dot.The results have shown the low-coverage dots at high line rulings to be particularly affected by the effect of variation in the impression pressure. This has significant implications for the ability of the process to reproduce high-resolution images that combine both highlight and shadow regions successfully and consistently. Ink spreading has been identified as the major cause of dot gain, except at low coverages, where the deformation of the dots makes a significant contribution. |
|---|---|
| College: |
Faculty of Science and Engineering |
| Issue: |
11 |
| Start Page: |
1499 |
| End Page: |
1511 |