Journal article 1637 views
In situ neutron diffraction study of texture evolution and variant selection during the α→β→α phase transformation in Ti–6Al–4V
G.C Obasi,
R.J Moat,
D.G. Leo Prakash,
W Kockelmann,
J. Quinta da Fonseca,
M Preuss,
Leo Prakash 
Acta Materialia, Volume: 60, Issue: 20, Pages: 7169 - 7182
Swansea University Author:
Leo Prakash
Full text not available from this repository: check for access using links below.
DOI (Published version): 10.1016/j.actamat.2012.09.026
Abstract
In the present study, in situ phase transformation experiments have been carried out using neutron diffraction to monitor the texture evolution during the α → β → α phase transformation in Ti–6Al–4V with and without 0.4% yttrium additions. The aim of adding yttrium was to control β grain growth abov...
| Published in: | Acta Materialia |
|---|---|
| ISSN: | 1359-6454 |
| Published: |
2012
|
| Online Access: |
Check full text
|
| URI: | https://cronfa.swan.ac.uk/Record/cronfa15868 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract: |
In the present study, in situ phase transformation experiments have been carried out using neutron diffraction to monitor the texture evolution during the α → β → α phase transformation in Ti–6Al–4V with and without 0.4% yttrium additions. The aim of adding yttrium was to control β grain growth above the β transus by Zener pinning. First, both alloys were thermomechanically processed to generate a similar starting α texture and grain morphology. Subsequently, both materials were heat treated above the β transus up to 1250 °C followed by furnace cooling to 210 °C to promote diffusional phase transformation starting from β grain boundaries. In situ texture measurements were taken during α → β → α phase transformation starting at room temperature, 800 °C, 950 °C, above β transus (1050 and 1250 °C), and back to near room temperature. The degree of variant selection was determined by comparing the predicted transformation texture during heating and cooling based on the Burgers relationship and the assumption of no variant selection with the measured textures. It was found that during heating β grows from the pre-existing β and that the β texture evolved even before the β transus was exceeded. The β texture strengthened noticeably above the β transus in the case of conventional Ti–6Al–4V but not Ti–6Al–4V–0.4Y, which was related to β grain coarsening. The level of variant selection was clearly affected by grain coarsening and the formation of β texture components that contribute to the 〈1 1 1〉//normal direction (ND) γ fibre texture rotated about 10° away from ND. |
|---|---|
| Item Description: |
In the view point of academia and industry, this research provides the mechanistic understanding of phase transformation related texture changes in Titanium, which is highly critical for Ti processing. This work has been carried out in association with the Rutherford Appleton Laboratory, UK (GEM diffractometer facilities, winfried.kockelmann@stfc.ac.uk). Furthermore, this is published in, the No.1 ranked journal in Metallurgy , Acta Materialia (5 year Impact factor: 4.395, citations: 2). |
| Keywords: |
Titanium alloys, Texture evolution, Neutron diffraction, Variant selection |
| College: |
Faculty of Science and Engineering |
| Issue: |
20 |
| Start Page: |
7169 |
| End Page: |
7182 |